Qu’est-ce que le mode SET de hörbert ?

Explanation of hörbert’s SET Mode

For all settings on the hörbert model with rotary knob for switching on/off, the Browser Set Mode, is available.

However, there’s also the possibility to activate some special functions, such as Bluetooth, WiFi or the voice microphone without the Browser Set Mode. Which functions can be set is shown by this SET template. It’s always included in the package when a new hörbert is delivered:

How do you put hörbert into SET mode?

  1. Open the rear back panel with a coin and pull the back panel out.
  2. Switch hörbert on, it will then play normally through its speaker.
  3. Press the small button labelled « SET » once inside hörbert, to the right of the hörbert logo on the circuit board. The LED on the SET button now lights up continuously green. hörbert is silent. The front buttons are now in SET mode.
  4. Set the desired functions. You can set all functions at once. A detailed explanation of the individual functions can be found below.
  5. Important: After setting the functions, you must press the SET button inside again so that they are also saved.
  6. There’s a time-out of approximately 5 minutes. So make all desired settings within this time and press the SET button again at the end to save.
  7. Wait a few seconds afterwards until hörbert plays normally again and then switch it off or let hörbert continue to entertain you, just as you wish.

What do the symbols on the SET template mean?

  1. Dark purple button: Activate Sleep Timer by pressing once. If you hear a single beep, the Sleep Timer is now activated. If you hear a double, slightly deeper tone, the Sleep Timer is off. To activate, simply press the dark purple button again. ON is illustrated on the template by the green tick. OFF is illustrated by the red XX.
  2. Red and dark blue button: Set the desired playing duration of the Sleep Timer. Each click on the red button means +1 hour. You can set up to 7 hours playing time, then the counter starts again at 0, indicated by a double beep. Each click on the dark blue button means: +10 minutes. So you can set a playing time of 2.5 hours, for example, by pressing the red button twice and the dark blue button three times.
  3. Light green button: Activate Bluetooth (single beep) / deactivate (double beep)
  4. Yellow button: Activate Pairing (single beep) / deactivate (double beep). If you want to pair a new Bluetooth device for the first time, e.g. mobile phone or wireless headphones with hörbert, you must activate both Bluetooth and Pairing. Once all desired devices in the household have been paired, the Pairing function can then be deactivated again on hörbert using the yellow button. This should prevent unwanted external devices from connecting accidentally.
  5. Dove blue button (middle row, far right): Delete all pairings.
  6. Light blue button: Activate volume limitation (pp stands for piano. This quiet setting is active when the double beep is heard)
  7. Orange button: Activate WiFi for listening to Internet radio (single beep) / deactivate (double beep)
  8. Dark green button: Activate voice microphone (single beep) / deactivate (double beep)

Further Notes